Home › STEERING › POWER STEERING › POWER STEERING SYSTEM (for 1UR-FE)

DTC    C1231    Lost Communication with Steering Angle Sensor Module

for Preparation Click here


DESCRIPTION

The power steering ECU receives steering angle signals from the steering angle sensor via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the steering angle signal.

DTC Code
DTC Detection Condition
Trouble Area
C1231
An abnormal steering angle signal is received.
  1. Steering angle sensor (Spiral cable sub-assembly)
  2. CAN communication system
  3. Power steering ECU assembly

INSPECTION PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
  1. Check if DTC U0073 is output (Click here).
    Result 
    Result
    Proceed to
    DTC U0073 is not output
    A
    DTC U0073 is output
    B

    HINT:
    DTC U0073 indicates a CAN communication malfunction in the power steering system.



B
REPAIR CIRCUIT INDICATED BY OUTPUT CODE (Click here)
A


2.CHECK OTHER DTC OUTPUT (BRAKE CONTROL SYSTEM)
  1. Using the Techstream, check for DTCs related to the steering angle sensor and confirm that there are no problems in the brake control system (Click here).
    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
REPAIR OR REPLACE CIRCUIT INDICATED BY OUTPUT CODE (STEERING ANGLE SENSOR CIRCUIT)
A

REPLACE POWER STEERING ECU ASSEMBLY (Click here)