Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Perform these procedures only when replacing the high mounted stop light assembly.
  2. A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL HIGH MOUNTED STOP LIGHT GASKET
  1. Install the new gasket.



2. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY


    E142777
  1. Connect the connectors and clamp.

  1. Install the stop light with the 2 nuts.



3. INSTALL ROOF HEADLINING ASSEMBLY
  1. for Regular Cab:
    Install the roof headlining (Click here).

  1. for Double Cab:
    Install the roof headlining (Click here).