Home › BODY ELECTRICAL › AUDIO / VISUAL › SATELLITE RADIO ANTENNA

SATELLITE RADIO ANTENNA > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE ROOF HEADLINING ASSEMBLY
  1. for Double Cab:
    Remove the roof headlining (Click here).

  1. for CrewMax:
    Remove the roof headlining (Click here).

  1. for Regular Cab:
    Remove the roof headlining (Click here).



4. REMOVE SATELLITE RADIO ANTENNA ASSEMBLY
  1. Disconnect the connector.

  1. Detach the 3 clamps.



  1. Remove the nut.


    B230987



    B231078
  1. Detach the 2 claws and remove the satellite radio antenna.