Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM (w/o Jam Protection Function)

POWER WINDOW CONTROL SYSTEM (w/o Jam Protection Function) > Driver Side Power Window Auto Down Function does not Operate

for Preparation Click here


DESCRIPTION

  1. If the AUTO DOWN function does not operate, the cause may be one or more of the following:
  1. The master switch has a malfunction.
  2. The driver side motor has a malfunction.
  3. The wiring between the master switch and the driver side motor is open or shorted.

WIRING DIAGRAM


B149728E05


INSPECTION PROCEDURE

1.CHECK MANUAL UP / DOWN FUNCTION
  1. Check that the manual UP/DOWN function of the master switch can operate the driver door power window.

    OK:
    Manual UP/DOWN function operates normally.



NG
OTHER PROBLEM (Click here)
OK

REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (Click here)