DTC B2311 Power Window Motor Malfunction |
| DTC Code | DTC Detection Condition | Trouble Area |
| B2311 |
|
|
| DTC Code | DTC Detection Condition | Trouble Area |
| B2311 |
|
|
| 1.PERFORM ACTIVE TEST USING TECHSTREAM (POWER WINDOW) |
Select the Active Test, use the Techstream to generate a control command, and then check that each door window regulator operates (Click here).
| Tester Display | Test Part | Control Range | Diagnostic Note |
| Power Window | Driver side power window | OFF/UP/DOWN | - |
| Tester Display | Test Part | Control Range | Diagnostic Note |
| Power Window | Front passenger side power window | OFF/UP/DOWN | - |
| Result | Proceed to |
| OK | A |
| NG (Driver side power window) | B |
| NG (Front passenger side power window) | C |
|
| ||||
|
| ||||
| A | |
| 2.PERFORM INITIALIZATION |
Initialize the power window regulator motor (Click here).
Check that each power window operates normally by opening and closing each window (Click here).
| Result | Proceed to |
| OK | A |
| NG (Driver side power window) | B |
| NG (Front passenger side power window) | C |
|
| ||||
|
| ||||
| A | |
| 3.CHECK WHETHER PARTS HAVE BEEN INSTALLED CORRECTLY |
Check that the power window components are installed correctly.
|
| ||||
| OK | ||
| ||