Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Center Seat)

FRONT SEAT INNER BELT ASSEMBLY (for Center Seat) > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY LH
  1. for Power Seat:
    Remove the front seat (Click here).

  1. for Manual Seat:
    Remove the front seat (Click here).



2. REMOVE FRONT SEAT ASSEMBLY RH
  1. for Power Seat:
    Remove the front seat (Click here).

  1. for Manual Seat:
    Remove the front seat (Click here).



3. REMOVE CENTER FRONT SEAT ASSEMBLY
  1. Remove the center front seat (Click here).



4. REMOVE CENTER SEATBACK PANEL


    B165566
  1. for Regular Cab:

    1. Detach the 4 claws, 4 clips and remove the center seatback panel.



    B166347
  1. for Double Cab:

    1. Remove the 2 screws.

    2. Detach the 4 clips and remove the center seatback panel.

    3. Disconnect the connector.



    B169093
  1. for CrewMax:

    1. Detach the 4 claws, 4 clips and remove the center seatback panel.

    2. Disconnect the connector.



5. REMOVE CENTER SEAT CUSHION SHIELD LH


B165567
  1. Using a T30 "TORX" socket wrench, remove the bolt.

  1. Detach the 7 claws and 2 clips and remove the center seat cushion shield LH.



6. REMOVE CENTER FRONT SEAT INNER BELT ASSEMBLY


B165811
  1. Remove the bolt and the center front seat inner belt.