Home › RESTRAINTS › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY (for Center Seat)

FRONT SEAT OUTER BELT ASSEMBLY (for Center Seat) > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
  1. Remove the front seat (Click here).



2. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
  1. Remove the front seat (Click here).



3. REMOVE CENTER FRONT SEAT ASSEMBLY
  1. Remove the front seat .



4. REMOVE CENTER SEAT CUSHION SHIELD LH


B165567
  1. Using a T30 "TORX" socket wrench, remove the bolt.

  1. Detach the 7 claws and 2 clips and remove the center seat cushion shield LH.



5. REMOVE CENTER SEAT CUSHION SHIELD RH


B165568
  1. Using a T30 "TORX" socket wrench, remove the bolt.

  1. Detach the 7 claws and 3 clips and remove the center seat cushion shield RH.



6. DISCONNECT CENTER FRONT SEAT BELT ASSEMBLY RH


B165812
  1. Remove the bolt and seat belt anchor.



7. REMOVE CENTER SEATBACK ASSEMBLY


    B165574
  1. Remove the 2 wire harness clamps from the center seatback frame.



    B165575
  1. LH Side:
    Using a T40 "TORX" socket wrench, remove the 2 bolts.

  1. RH Side:
    Using a T55 "TORX" socket wrench, remove the 2 bolts.

  1. Remove the center seatback assembly.



8. REMOVE FRONT SEAT HEADREST ASSEMBLY


9. REMOVE FRONT SEAT SHOULDER BELT COVER


B165580
  1. Using a T10 "TORX" socket wrench, remove the 2 screws and front seat shoulder belt cover.



10. REMOVE UPPER REAR SEATBACK LOCK BEZEL


B165581
  1. Detach the 4 claws and remove the upper rear seatback lock bezel.

  1. Disconnect the center front seat belt assembly from the front seat shoulder belt cover.



11. REMOVE LOWER FRONT SEAT SHOULDER BELT COVER


B165582
  1. Using a T30 "TORX" socket wrench, remove the 2 bolts and lower front seat shoulder belt cover.



12. REMOVE RECLINING REMOTE CONTROL BEZEL


B165583
  1. Detach the 2 clips and claw, and then remove the reclining remote control bezel.



13. REMOVE FRONT SEAT TRAY


B165584
  1. Detach the 5 clips and remove the front seat tray.



14. REMOVE CENTER FRONT SEAT ARMREST COVER


B165585
  1. Remove the 2 screws and center front seat armrest cover.



15. REMOVE SEAT FASTENER COVER


B165586
  1. Detach the 6 claws and remove the 2 seat fastener covers.



16. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY


    B165587
  1. Remove the 6 screws.



    B165588
  1. Detach the 21 claws and remove the screw.



    B165592
  1. LH Side:
    Disconnect the cable from the center seatback frame inner side.



    B165591
  1. RH Side:
    Disconnect the cable from the center seatback frame inner side.

  1. Remove the front seatback board sub-assembly.



17. REMOVE FRONT SEAT HEADREST SUPPORT


B165593
  1. Detach the 4 claws and remove the 2 front seat headrest supports.



18. REMOVE CENTER FRONT SEAT BELT ASSEMBLY RH


B165813
  1. Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.