WATER PUMP > REMOVAL |
| 1. REMOVE FAN SHROUD |
| 2. REMOVE WATER INLET SUB-ASSEMBLY WITH THERMOSTAT |
| 3. REMOVE NO. 1 WATER BY-PASS HOSE |
![]() |
Remove the No. 1 water by-pass hose.
| 4. DISCONNECT NO. 8 WATER BY-PASS HOSE |
![]() |
Disconnect the No. 8 water by-pass hose.
| 5. DISCONNECT NO. 5 WATER BY-PASS HOSE |
![]() |
Disconnect the No. 5 water by-pass hose.
| 6. REMOVE WATER INLET HOUSING |
![]() |
Remove the 3 bolts and water inlet housing.
Remove the gasket from the water pump assembly.
| 7. REMOVE WATER PUMP PULLEY |
![]() |
Using SST, hold the water pump pulley.
Remove the 4 bolts and water pump pulley.
| 8. REMOVE WATER PUMP ASSEMBLY |
![]() |
Remove the 8 bolts, water pump assembly and gasket.