Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL CENTER STOP LIGHT GASKET
  1. Install a new center stop light gasket.



2. INSTALL CENTER STOP LIGHT ASSEMBLY
  1. Connect the connector and attach the clamp.

  1. Install the center stop light assembly with the 2 nuts.



3. INSTALL ROOF HEADLINING ASSEMBLY
  1. for Regular Cab:
    (Click here).

  1. for Double Cab:
    (Click here).

  1. for CrewMax:
    (Click here)