Home › COMMUNICATION SYSTEM › CAN COMMUNICATION › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > DIAGNOSTIC TROUBLE CODE CHART

for Preparation Click here


HINT:
If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.


CAN Communication System 
DTC Code
Detection Item
DTC Output from
See page
U0199
Lost Communication with "Door Control Module A"
Main body ECU (driver side junction block assembly)
Click here
U0208
Lost Communication with "Seat Control Module A"
Main body ECU (driver side junction block assembly)
Click here
U0233
Lost Communication with Blind Spot Monitor Master Module
Network gateway ECU
Click here
U1002
Lost Communication with Gateway Module
Main body ECU (driver side junction block assembly)
Click here
U1002 (CAN No. 2 BUS)
Lost Communication with Gateway Module (Network Gateway ECU)
Network gateway ECU
Click here
U1115
Lost Communication with Tilt and Telescopic Module
Main body ECU (driver side junction block assembly)
Click here