Home › BODY ELECTRICAL › OTHER SYSTEM › CENTER POWER OUTLET SOCKET (for Column Shift Type)

CENTER POWER OUTLET SOCKET (for Column Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)
(Click here)


2. REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat)

HINT:
Use the same procedure described for the LH side.



3. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)
(Click here)


4. REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat)

HINT:
Use the same procedure described for the LH side.



5. REMOVE CENTER FRONT SEAT ASSEMBLY
(Click here)


6. REMOVE POWER OUTLET SOCKET ASSEMBLY


    B166902E02
  1. Disconnect the power outlet socket connector.

  1. Using a screwdriver, detach the claw and remove the power outlet socket assembly.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



7. REMOVE POWER OUTLET SOCKET COVER


    B165428E01
  1. Detach the 2 claws and remove the power outlet socket cover.



8. REMOVE CENTER SEATBACK PANEL (for Double Cab)


    B165566
  1. for Regular Cab:

    1. Detach the 4 claws, 4 clips and remove the center seatback panel.



    B166347
  1. for Double Cab:

    1. Remove the 2 screws.

    2. Detach the 4 clips and remove the center seatback panel.

    3. Disconnect the connector.



    B169093
  1. for CrewMax:

    1. Detach the 4 claws, 4 clips and remove the center seatback panel.

    2. Disconnect the connector.



9. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY (for Double Cab)


    B166901E02
  1. Using a screwdriver, detach the claw and remove the rear power outlet socket assembly.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



10. REMOVE REAR POWER OUTLET SOCKET COVER (for Double Cab)


B165426E01
  1. Detach the 2 claws and remove the rear power outlet socket cover.