Home › BODY ELECTRICAL › AUDIO / VISUAL › STEREO COMPONENT AMPLIFIER

STEREO COMPONENT AMPLIFIER > INSTALLATION

for Preparation Click here



1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY



B353903E02


Text in Illustration 
*A
for 12 Speakers
*B
except 12 Speakers
*a
Guide
-
-
  1. Attach the guide to install the stereo component amplifier assembly.

  1. Install the 3 bolts.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }

    HINT:
    Tighten the bolts in the order shown in the illustration.

  1. for 12 Speakers:
    Connect the 3 connectors.

  1. except 12 Speakers:
    Connect the 2 connectors.



2. INSTALL AUDIO AMPLIFIER COVER
  1. Attach the 3 clips to install the audio amplifier cover.



3. INSTALL FRONT SEAT ASSEMBLY RH
  1. for Manual Seat:
    (Click here)

  1. for Power Seat:
    (Click here)



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).