Home › BODY ELECTRICAL › AUDIO / VISUAL › STEREO COMPONENT AMPLIFIER

STEREO COMPONENT AMPLIFIER > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE FRONT SEAT ASSEMBLY RH
  1. for Manual Seat:
    (Click here)

  1. for Power Seat:
    (Click here)



4. REMOVE AUDIO AMPLIFIER COVER


  1. Detach the 3 clips and remove the audio amplifier cover.


    B353902E01


    Text in Illustration 
    *A
    for 12 Speakers
    *B
    except 12 Speakers



5. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY



B353903E01


Text in Illustration 
*A
for 12 Speakers
*B
except 12 Speakers
*a
Guide
-
-
  1. for 12 Speakers:
    Disconnect the 3 connectors.

  1. except 12 Speakers:
    Disconnect the 2 connectors.

  1. Remove the 3 bolts.

  1. Detach the guide and stereo component amplifier assembly.