Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION ANTENNA

NAVIGATION ANTENNA > INSTALLATION

for Preparation Click here



1. INSTALL NAVIGATION ANTENNA ASSEMBLY
  1. Attach the 2 guides to install the navigation antenna assembly.

  1. Install the 2 screws.

  1. Attach the 2 clamps.



2. INSTALL DEFROSTER NOZZLE ASSEMBLY


B355378
  1. Install the defroster nozzle assembly with the 3 screws <E>.

  1. Connect the No. 1 side defroster nozzle duct and No. 2 side defroster nozzle duct to the defroster nozzle assembly.



3. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
  1. Install the No. 1 side defroster nozzle duct with the 2 screws <E>.



4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
  1. Install the No. 2 side defroster nozzle duct with the 2 screws <E>.



5. INSTALL NO. 2 HEATER TO REGISTER DUCT
  1. Install the No. 2 heater to register duct with the 8 screws <E>.



6. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
  1. for Column Shift Type:
    (Click here)

  1. for Floor Shift Type:
    (Click here)



7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



8. CHECK SRS WARNING LIGHT
(Click here)