Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function)

POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function) > DIAGNOSTIC TROUBLE CODE CHART

for Preparation Click here


HINT:
If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.


Power Window Control System 
DTC Code
Detection Item
Suspected Part
See page
B2311
Power Window Motor Malfunction
- Battery disconnection when ignition switch ON
- Front power window regulator motor assembly LH
- Front power window regulator motor assembly RH
- Incorrect installation of power window components
- Overheated power window regulator motor
Click here
B2312
Power Window Switch Malfunction
- Power window regulator master switch assembly
- Power window regulator switch assembly
- Front power window regulator motor assembly LH
- Front power window regulator motor assembly RH
- Harness or connector
- Power window regulator master switch assembly held in same position for more than 20 sec.
- Power window regulator switch assembly held in same position for more than 20 sec.
Click here
B2313
Glass Position Initialization Incomplete
- Front power window regulator motor assembly LH
- Front power window regulator motor assembly RH
- Power window regulator motor not initialized
Click here