Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    B15F6    Main Body ECU Vehicle Information Reading/Writing Process Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored when items controlled by the main body ECU (driver side junction block assembly) cannot be customized via the navigation system vehicle customization screen.

HINT:
The main body ECU (driver side junction block assembly) controls the items for the following systems that are customizable via the navigation receiver assembly screen:
  1. Power door lock control system
  2. Wireless door lock control system
  3. Lighting system


DTC Code
DTC Detection Condition
Trouble Area
B15F6
Main body ECU (driver side junction block assembly) vehicle setting processing error.
  1. CAN communication system
  2. Power door lock control system
  3. Wireless door lock control system
  4. Lighting system
  5. Main body ECU (driver side junction block assembly)
  6. Navigation receiver assembly

INSPECTION PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
  1. Use the Techstream to check if the CAN communication system is functioning normally (Click here).

    OK:
    CAN communication DTCs are not output.



NG
GO TO CAN COMMUNICATION SYSTEM (Click here)
OK


2.CHECK POWER DOOR LOCK CONTROL SYSTEM
  1. Check if the power door lock control system is malfunctioning (Click here).

    HINT:
    Customization may not be possible depending on the malfunction in the power door lock control system.

    OK:
    No malfunctions are present in the power door lock control system.



NG
GO TO POWER DOOR LOCK CONTROL SYSTEM (Click here)
OK


3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
  1. Check if the wireless door lock control system is malfunctioning (Click here).

    HINT:
    Customization may not be possible depending on the malfunction in the wireless door lock control system.

    OK:
    No malfunctions are present in the wireless door lock control system.



NG
GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (Click here)
OK


4.CHECK LIGHTING SYSTEM
  1. Check if the lighting system is malfunctioning (Click here).

    HINT:
    Customization may not be possible depending on the malfunction in the lighting system.

    OK:
    No malfunctions are present in the lighting system.



NG
GO TO LIGHTING SYSTEM (Click here)
OK


5.CHECK CUSTOMIZE ITEMS
  1. Display the "Vehicle Customization" screen.

  1. Make a note of the customizable items for each main body ECU (driver side junction block assembly) related system.

    HINT:
    These items shown as customizable via the navigation receiver assembly vehicle customization screen can also be changed using the Techstream. In a following step, the Techstream will be used.

    1. To match-up the items in the navigation receiver assembly with the items on the Techstream, check the customize parameters list for the power door lock control system related items that can be customized via the navigation receiver assembly screen (Click here).

    2. To match-up the items in the navigation receiver assembly with the items on the Techstream, check the customize parameters list for the wireless door lock control system related items that can be customized via the navigation receiver assembly screen (Click here).

    3. To match-up the items in the navigation receiver assembly with the items on the Techstream, check the customize parameters list for the lighting system related items that can be customized via the navigation receiver assembly screen (Click here).

  1. Using the Techstream, confirm that it is possible to change the settings of the customize parameters that are available for customization via the navigation receiver assembly screen.

    OK:
    The items available for customization via the navigation receiver assembly screen can be customized successfully using the Techstream.

    Result 
    Result
    Proceed to
    OK (for Column Shift Type)
    A
    OK (for Floor Shift Type)
    B
    NG
    C



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)

C
REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY)
A

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)