Home › BODY ELECTRICAL › AUDIO / VISUAL › SATELLITE RADIO ANTENNA

SATELLITE RADIO ANTENNA > INSTALLATION

for Preparation Click here



1. INSTALL SATELLITE RADIO ANTENNA ASSEMBLY
  1. Attach the 2 claws and guide to install the satellite radio antenna assembly.



  1. Install the nut.

    Torque:
    4.5 N*m{ 45 kgf*cm , 39 in.*lbf }



    B355127E01


    Text in Illustration 
    *a
    Guide
    -
    -

  1. Attach the 3 clamps.

  1. Connect the connector.



2. INSTALL ROOF HEADLINING ASSEMBLY
  1. for Double Cab:
    (Click here)

  1. for CrewMax:
    (Click here)

  1. for Regular Cab:
    (Click here)



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).