Home › Engine / Hybrid System › 1UR-FE ENGINE CONTROL › THROTTLE BODY
RM27M0U _51 Engine / Hybrid System _049093 1UR-FE ENGINE CONTROL _0233891 THROTTLE BODY G

1UR-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY ASSEMBLY

a.

Check the throttle valve.

i.

Check that the throttle valve opens and closes smoothly.


ii.

Check that there is no sludge accumulating around the throttle body.



b.
A163107E01
0.113,2.353 2.605,2.717 2.492,0.364 10 Component without harness connected: (Throttle Body) 1.372,3.119 1.596,3.312 0.224,0.192 10 M+ 2.846,3.119 3.070,3.312 0.224,0.192 10 M- 2.447,3.804 2.766,3.216 2.766,3.216 2.827,3.216 false 2.041,3.804 1.722,3.216 1.722,3.216 1.641,3.216 false

Check the throttle control motor.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body assembly.