Home › Engine / Hybrid System › 1UR-FE ENGINE CONTROL › AIR FUEL RATIO SENSOR
RM27M0U _51 Engine / Hybrid System _049093 1UR-FE ENGINE CONTROL _0233900 AIR FUEL RATIO SENSOR A

1UR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves when removing the exhaust pipe assembly.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



PROCEDURE

Hide 17410 1.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 89467B 2.REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

a.
A215441E01
0.131,1.044 0.425,1.196 0.295,0.152 10 SST 0.509,1.13 0.573,1.13 0.573,1.13 1.003,0.632 false

Using SST, remove the air fuel ratio sensor.

SST
09224-00010  


Hide 17450B 3.REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY

Hide 89467B 4.REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

a.

Disconnect the air fuel ratio sensor connector.


b.
A379740E01
1.646,0.51 2.135,1.073 2.135,1.073 2.281,1.073 true 2.333,0.979 2.792,1.177 0.458,0.198 10 false SST

Using SST, remove the air fuel ratio sensor.

SST
09224-00010