Home › Engine / Hybrid System › 1UR-FE ENGINE CONTROL › MANIFOLD ABSOLUTE PRESSURE SENSOR
RM27M0U _51 Engine / Hybrid System _049093 1UR-FE ENGINE CONTROL _0233907 MANIFOLD ABSOLUTE PRESSURE SENSOR G

1UR-FE ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSPECTION  


PROCEDURE

Hide 89421B 1.INSPECT MANIFOLD ABSOLUTE PRESSURE SENSOR

A106949E02
0.773,1.827 1.091,1.977 0.318,0.150 10 THA 2.343,1.827 2.612,1.977 0.269,0.150 10 PIM 1.319,1.827 1.543,1.977 0.224,0.150 10 VC 1.89,1.827 2.084,1.977 0.194,0.150 10 E2 1.862,1.361 1.983,1.799 false 2.144,1.361 2.47,1.799 false 1.306,1.361 0.979,1.799 false 1.583,1.361 1.463,1.799 false 0.045,0.01 2.534,0.393 2.489,0.383 10 Component without harness connected: (Manifold Absolute Pressure Sensor)

a.

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (THA) - 2 (E2) -20°C (-4°F) 14.6 to 17.8 kΩ
4 (THA) - 2 (E2) 20°C (68°F) 2.21 to 2.69 kΩ
4 (THA) - 2 (E2) 80°C (176°F) 0.29 to 0.354 kΩ


If the result is not as specified, replace the manifold absolute pressure sensor.