Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › SFI SYSTEM
RM27M0U _51 Engine / Hybrid System _049094 3UR-FE ENGINE CONTROL _0233910 SFI SYSTEM L

3UR-FE ENGINE CONTROL  SFI SYSTEM  PRECAUTION  


INITIALIZATION



NOTICE:
·

Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components (See page Engine / Hybrid System>3UR-FE ENGINE CONTROL>THROTTLE BODY>INSTALLATION).

·

Perform Reset Memory (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM (See page Drivetrain>AB60F AUTOMATIC TRANSMISSION / TRANSAXLE>AUTOMATIC TRANSMISSION SYSTEM>INITIALIZATION).

·

Perform Registration (VIN registration) when replacing the ECM (See page Engine / Hybrid System>3UR-FE ENGINE CONTROL>SFI SYSTEM>REGISTRATION).



HINT:

RESET MEMORY cannot be completed by only removing the battery.


WHEN USING TECHSTREAM



CAUTION:

Observe the following items for safety reasons:

·

Read its instruction books before using the Techstream.

·

Prevent the Techstream cable from being caught on the pedals, shift lever and steering wheel when driving with the Techstream connected to the vehicle.

·

When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One person drives the vehicle, and the other operates the Techstream.