Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM27M0U _51 Engine / Hybrid System _049094 3UR-FE ENGINE CONTROL _0233915 ENGINE COOLANT TEMPERATURE SENSOR A

3UR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 11209 2.REMOVE V-BANK COVER SUB-ASSEMBLY

Hide 89422 4.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

A158619

a.

Disconnect the sensor connector.


b.

Using a 19 mm ball joint lock nut wrench, remove the sensor.


c.

Remove the gasket from the sensor.