Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › KNOCK SENSOR
RM27M0U _51 Engine / Hybrid System _049094 3UR-FE ENGINE CONTROL _0233917 KNOCK SENSOR A

3UR-FE ENGINE CONTROL  KNOCK SENSOR  REMOVAL  


PROCEDURE

Hide 17111 1.REMOVE INTAKE MANIFOLD

Hide 16297 4.DISCONNECT NO. 9 WATER BY-PASS HOSE

a.
A313313

Slide the clamp and disconnect the No. 9 water by-pass hose from the separator case.


Hide 16293 5.DISCONNECT NO. 10 WATER BY-PASS HOSE

a.
A313314

Slide the clamp and disconnect the No. 10 water by-pass hose from the separator case.


Hide 12215 6.REMOVE SEPARATOR CASE

a.
A271506

Remove the 4 bolts and separator case.


Hide 89615 7.REMOVE KNOCK SENSOR

a.

Disconnect the 4 knock sensor connectors.


b.
A158615

Remove the 4 bolts and 4 knock sensors.