Home › Engine / Hybrid System › 3UR-FBE FUEL › FUEL INJECTOR
RM27M0U _51 Engine / Hybrid System _049096 3UR-FBE FUEL _0233949 FUEL INJECTOR A

3UR-FBE FUEL  FUEL INJECTOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repairs" after replacing the fuel injector (See page Engine / Hybrid System>3UR-FBE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION).


PROCEDURE

Hide 23250 1.INSTALL FUEL INJECTOR ASSEMBLY

HINT:

Perform "Inspection After Repairs" after replacing the fuel injector (See page Engine / Hybrid System>3UR-FBE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION).


a.
A256379

Attach the 3 clamps to install the No. 6 wire harness to the delivery pipe RH.


b.
A256380

Attach the 3 clamps to install the No. 7 wire harness to the delivery pipe LH.


c.
A149190E01
2.549,1.735 3.077,1.909 0.527,0.173 10 O-Ring 2.852,1.454 2.852,1.704 false

Apply gasoline or spindle oil to a new O-ring and install it to the injector.

NOTICE:

Make sure that there is no damage or foreign matter in the groove of the injector when installing the O-ring.



d.
U151477

Connect the injector connector.


e.
U151479E02
0.458,0.208 0.552,0.208 0.552,0.208 0.604,0.563 false 0.24,0.844 0.24,0.771 0.24,0.771 0.479,0.75 false 1.729,1.833 2.375,1.833 false 2.375,1.688 1.813,1.833 false 1.552,2.25 1.552,2.135 1.552,2.135 2.219,1.948 false 1.219,1.323 2.083,1.469 0.865,0.146 10 false INCORRECT 0.198,1.219 0.906,1.375 0.708,0.156 10 false CORRECT 1.552,2.333 1.677,2.479 0.125,0.146 10 false B 1.531,1.74 1.656,1.885 0.125,0.146 10 false A 0.229,0.177 0.354,0.323 0.125,0.146 10 false A 0.198,0.896 0.323,1.042 0.125,0.146 10 false B

Install the injector to the delivery pipe as shown in the illustration.

NOTICE:
·

Make sure that there are no scratches or foreign matter in or around the hole of the delivery pipe.

·

When installing the injector, be careful not to damage the O-ring.

·

Attach the part of the injector labeled B between the parts of the delivery pipe labeled A.




f.
A256393E01
0.083,0.13 0.979,0.517 0.897,0.387 10 Fuel Delivery Pipe RH: 2.203,3.488 3.151,3.880 0.948,0.392 10 Fuel Delivery Pipe LH:

Check that each injector is installed to the delivery pipe facing the direction shown in the illustration.


Hide 23807 2.INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY LH

a.
A256378

Install the 2 delivery pipe spacers and 4 insulators to the cylinder head LH.


b.

Install the delivery pipe (with injectors) to the cylinder head LH.


c.

Install the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

NOTICE:
U151514E02
1.073,0.104 1.219,0.104 1.219,0.104 1.406,0.865 false 0.438,0.635 0.604,0.635 0.604,0.635 0.958,0.885 false 0.448,1.052 0.927,1.052 false 0.667,1.396 0.979,1.396 false 0.594,1.688 1.323,1.833 0.729,0.146 10 false CORRECT 1.833,1.677 2.698,1.833 0.865,0.156 10 false INCORRECT 0.063,1.281 0.552,1.458 0.49,0.177 10 false Injector 0.021,0 0.885,0.188 0.865,0.188 10 false Delivery Pipe 0.188,0.552 0.313,0.698 0.125,0.146 10 false A 0.198,0.969 0.323,1.115 0.125,0.146 10 false B

Make sure that the part of the injector labeled B is between the parts of the delivery pipe labeled A.



d.

Connect the No. 7 wire harness connector.


e.

Install the No. 1 engine cover sub-assembly.


Hide 23808 3.INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY RH

a.
A256377

Install the 2 delivery pipe spacers and 4 insulators to the cylinder head RH.


b.

Install the delivery pipe (with injectors) to the cylinder head RH.


c.

Install the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

NOTICE:
U151514E02
1.073,0.104 1.219,0.104 1.219,0.104 1.406,0.865 false 0.438,0.635 0.604,0.635 0.604,0.635 0.958,0.885 false 0.448,1.052 0.927,1.052 false 0.667,1.396 0.979,1.396 false 0.594,1.688 1.323,1.833 0.729,0.146 10 false CORRECT 1.833,1.677 2.698,1.833 0.865,0.156 10 false INCORRECT 0.063,1.281 0.552,1.458 0.49,0.177 10 false Injector 0.021,0 0.885,0.188 0.865,0.188 10 false Delivery Pipe 0.188,0.552 0.313,0.698 0.125,0.146 10 false A 0.198,0.969 0.323,1.115 0.125,0.146 10 false B

Make sure that the part of the injector labeled B is between the parts of the delivery pipe labeled A.



d.

Install the No. 3 engine cover.


e.
A198623

Connect the No. 6 wire harness connector.


f.

Connect the ventilation hose.


Hide 23801P 4.CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY

a.
A308885

Connect the No. 1 fuel pipe sub-assembly to the fuel delivery pipe LH (for quick type B) (See page Engine / Hybrid System>3UR-FBE FUEL>FUEL SYSTEM>PRECAUTION).


b.

Attach the clamp.


Hide 23901 5.CONNECT FUEL TUBE SUB-ASSEMBLY

a.
A161415

Connect the fuel tube to the delivery pipe LH (for quick type A) (See page Engine / Hybrid System>3UR-FBE FUEL>FUEL SYSTEM>PRECAUTION).


b.
A256329

Connect the fuel tube to the delivery pipe RH (for quick type A) (See page Engine / Hybrid System>3UR-FBE FUEL>FUEL SYSTEM>PRECAUTION).


Hide 23902 6.CONNECT NO. 2 FUEL TUBE SUB-ASSEMBLY

a.
A161418

Connect the No. 2 fuel tube to the fuel pressure regulator (for quick type A) (See page Engine / Hybrid System>3UR-FBE FUEL>FUEL SYSTEM>PRECAUTION).


Hide 17880 7.INSTALL AIR CLEANER HOSE ASSEMBLY

Hide 9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 10.INSPECT FOR FUEL LEAK

a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch to ON and Techstream main switch on.

NOTICE:

Do not start the engine.



c.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.


d.

Check that there are no fuel leaks after doing maintenance anywhere on the fuel system.