Home › Engine / Hybrid System › 1UR-FE EMISSION CONTROL › AIR PUMP
RM27M0U _51 Engine / Hybrid System _049101 1UR-FE EMISSION CONTROL _0233989 AIR PUMP A

1UR-FE EMISSION CONTROL  AIR PUMP  INSTALLATION  


PROCEDURE

Hide 17600C 1.INSTALL AIR PUMP ASSEMBLY

a.

Connect the 6 air pump insulators to the 2 air pump assemblies and install the 2 air pump assemblies to the air pump bracket.


b.

Attach the 2 wire harness clamps to the air pump bracket.


Hide 17341 2.INSTALL NO. 1 AIR INJECTION SYSTEM HOSE

a.
A302344E03
1.021,0.323 1.135,0.323 1.135,0.323 1.344,0.74 false 2.542,1.5 2.542,1.021 2.542,1.021 2.115,0.677 false 0.833,0.25 1,0.438 0.167,0.188 10 false *a 2.469,1.542 2.656,1.76 0.188,0.219 10 false *1

Install the 2 No. 1 air injection system hoses to the 2 air pump assemblies.

Text in Illustration
*1 No. 1 Air Injection System Hose
*a Stopper

HINT:

Insert the hoses until the hose ends contact the stoppers as shown in the illustration.



Hide 17621A 3.INSTALL AIR PUMP INLET

a.
A302345E02
0.818,0.164 1.018,0.347 0.200,0.183 10 *a 2.25,0.139 2.423,0.322 0.173,0.183 10 *1 2.22,0.228 2.113,0.228 2.113,0.228 1.979,0.616 false 1.045,0.265 1.482,0.265 1.482,0.265 1.757,0.58 false 1.475,0.265 1.763,0.892 false

Connect the air pump inlet to the 2 No. 1 air injection system hoses to install it, and then slide the 2 clamps onto the hoses.

Text in Illustration
*1 Air Pump Inlet
*a Stopper

HINT:

Insert the inlet until the inlet stoppers contact the No.1 air injection system hoses as shown in the illustration.



b.

Install the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 4.INSTALL AIR PUMP ASSEMBLY WITH BRACKET

a.
U151773E02
1.177,2.573 1.906,2.573 false 1.938,2.51 2.135,2.698 0.198,0.188 10 false *1 1.052,3 1.208,3.167 0.156,0.167 10 false A 3.146,2.583 3.25,2.771 0.104,0.188 10 false B

Install the air pump assembly with bracket to the vehicle.

Text in Illustration
*1 Stud Bolt

i.

Insert the bracket tab into the slot and insert the stud bolt into the bracket hole as shown in illustration A. Then slide the bracket.


ii.

Insert the bracket tab into the slot shown in illustration B.


iii.

Install the 2 bolts and 2 nuts.

Torque:
for bolt : 18 N*m (184 kgf*cm, 13 ft.*lbf)
for nut : 12 N*m (122 kgf*cm, 9 ft.*lbf)



b.
A214252

Connect the 2 air pump connectors and attach the 3 wire harness claws.


Hide 17343 5.INSTALL NO. 3 AIR INJECTION SYSTEM HOSE

U151774E02
4.948,2.479 4.781,3.51 4.781,3.51 5,2.792 false 4.042,0.521 5.385,1.146 5.385,1.146 5.646,0.75 false 0.74,3.354 0.99,3.188 0.99,3.188 1.094,3.188 true 0.729,3.521 1.073,3.844 1.073,3.844 1.188,3.844 true 0.594,0.729 0.594,1.177 false 5.771,0.708 5.99,0.708 true 2.375,5.073 2.042,5.5 2.042,5.5 1.906,5.5 false 5.542,5.156 5.542,5.354 false 5.615,0.5 5.708,0.24 5.708,0.24 5.844,0.24 false 5.781,0.5 5.719,0.26 true 6.448,3.417 6.51,3.333 6.51,3.333 6.771,3.333 false 0.594,4.448 0.729,4.448 0.729,4.448 0.948,4.698 false 0.521,5.073 0.521,4.99 0.521,4.99 0.823,4.875 false 3.573,4.385 3.698,4.385 3.698,4.385 3.771,4.594 false 3.781,1.01 3.781,0.917 3.781,0.917 4,0.781 false 2.792,1.052 2.792,0.844 2.792,0.844 2.719,0.781 false 1.24,2.365 1.375,2.365 1.375,2.365 3.365,3.104 false 1.417,1.719 1.625,1.719 1.625,1.719 2.677,2.5 false 3.417,4.927 3.802,4.792 false 3.417,5.073 3.417,4.927 3.417,4.927 3.688,4.719 false 3.708,5.021 4.385,5.385 4.385,5.385 5.479,5.073 false 0.729,4.448 0.813,4.688 false 2.51,5.083 2.51,5.375 2.51,5.375 2.583,5.375 false 0.979,4.51 1.729,5.021 1.729,5.021 2.49,4.75 false 3.906,4.479 4.521,5.042 4.521,5.042 5.427,4.802 false 6.135,2.688 6.25,2.688 6.25,2.688 6.583,2.281 false 6.177,4.094 6.292,4.094 6.292,4.094 6.604,3.625 false 2.938,4.365 3.094,4.531 0.156,0.167 10 false B 5.813,4.375 5.969,4.542 0.156,0.167 10 false G 1.698,2.979 1.854,3.146 0.156,0.167 10 false A 1.948,2.979 2.104,3.146 0.156,0.167 10 false E 2.969,0.188 3.125,0.354 0.156,0.167 10 false B 4.677,3.521 4.885,3.729 0.208,0.208 10 false *3 3.396,4.302 3.583,4.49 0.188,0.188 10 false *c 3.708,1.042 3.896,1.208 0.188,0.167 10 false *4 2.594,5.302 2.771,5.479 0.177,0.177 10 false *4 1.115,3.115 1.292,3.302 0.177,0.188 10 false *c 1.24,3.771 1.5,3.948 0.26,0.177 10 false *f 0.427,4.375 0.604,4.573 0.177,0.198 10 false *c 3.323,5.083 3.51,5.26 0.188,0.177 10 false *c 6.427,1.646 6.656,1.854 0.229,0.208 10 false *a 6.458,2.948 6.646,3.146 0.188,0.198 10 false *a 5.792,2.365 5.99,2.531 0.198,0.167 10 false *b 5.708,3.729 5.885,3.917 0.177,0.188 10 false *b 5.979,3.365 6.24,3.531 0.26,0.167 10 false 90° 6.802,3.271 7.031,3.438 0.229,0.167 10 false 45° 6.698,1.792 6.958,1.958 0.26,0.167 10 false 90° 2.698,1.073 2.885,1.26 0.188,0.188 10 false *c 0.5,1.198 0.719,1.385 0.219,0.188 10 false *1 5.885,0.167 6.104,0.333 0.219,0.167 10 false *c 6.01,0.604 6.219,0.802 0.208,0.198 10 false *4 4.313,5.438 4.521,5.615 0.208,0.177 10 false *4 0.406,5.083 0.615,5.271 0.208,0.188 10 false *4 5.281,1.698 5.438,1.865 0.156,0.167 10 false C 5.292,3.01 5.448,3.177 0.156,0.167 10 false F 3.448,0.188 3.604,0.354 0.156,0.167 10 false D 1.729,5.438 1.927,5.625 0.198,0.188 10 false *d 5.448,5.365 5.656,5.552 0.208,0.188 10 false *e 5.323,1.198 5.563,1.385 0.24,0.188 10 false *1 1.25,1.646 1.427,1.833 0.177,0.188 10 false *1 1.063,2.292 1.25,2.49 0.188,0.198 10 false *2 1.625,5.042 1.833,5.219 0.208,0.177 10 false *2 4.406,5.052 4.635,5.26 0.229,0.208 10 false *2 5.958,2.615 6.146,2.802 0.188,0.188 10 false *c 6.01,3.979 6.198,4.167 0.188,0.188 10 false *c

Text in Illustration
*1 No. 3 Air Injection System Hose *2 No. 2 Air Injection System Hose
*3 Air Tube *4 Wire Harness
*a Upper *b Front
*c Paint Mark *d Black Colored Clamp
*e White Colored Clamp *f Rib

a.

Connect the No. 3 air injection system hose, and slide the clamp to secure the hose so that its paint mark aligns with the air pump's rib as shown in the illustration labeled A.


b.

Attach the clamp to the No. 3 air injection system hose shown in the illustration labeled B.

HINT:

Align the paint mark of the No. 3 air injection system hose with the edge of the clamp.



c.

Connect the No. 3 air injection system hose to the air tube, and slide the clamp to secure the hose shown in the illustration labeled C.

HINT:
·

Make sure the paint mark of the No. 3 air injection system hose is facing upward.

·

Make sure the direction of the hose clamp is as shown in the illustration.




d.

Attach the clamp to the No. 3 air injection system hose and wire harness shown in the illustration labeled D.

HINT:

Align the paint mark of the No. 3 air injection system hose and paint mark of the wire harness with the edge of the clamp.



Hide 17342 6.INSTALL NO. 2 AIR INJECTION SYSTEM HOSE

a.

Connect the No. 2 air injection system hose, and slide the clamp to secure the hose so that its paint mark aligns with the air pump's rib as shown in the illustration labeled E.


b.

Connect the No. 2 air injection system hose to the air tube, and slide the clamp to secure the hose shown in the illustration labeled F.

HINT:
·

Make sure the paint mark of the No. 2 air injection system hose is facing upward.

·

Make sure the direction of the hose clamp is as shown in the illustration.




c.

Attach the white colored clamp to the No. 2 air injection system hose and wire harness shown in the illustration labeled G.

HINT:
·

Make sure the paint mark of the No. 2 air injection system hose is facing upward.

·

Make sure the direction of the hose clamp is as shown in the illustration.




d.

Attach the black colored clamp to the No. 2 air injection system hose and wire harness shown in the illustration labeled H.


Hide 53736 7.CONNECT FRONT FENDER APRON SEAL RH

a.

Connect the front fender apron seal RH to the body panel with the 2 clips.


Hide 8.CONNECT FRONT FENDER LINER RH