Home › Engine / Hybrid System › 1UR-FE EMISSION CONTROL › AIR SWITCHING VALVE(for Bank 2)
RM27M0U _51 Engine / Hybrid System _049101 1UR-FE EMISSION CONTROL _0233998 AIR SWITCHING VALVE(for Bank 2) A

1UR-FE EMISSION CONTROL  AIR SWITCHING VALVE(for Bank 2)  INSTALLATION  


PROCEDURE

Hide 25710 1.INSTALL AIR SWITCHING VALVE ASSEMBLY

a.
A307658E03
0.906,0.448 1.125,0.146 1.125,0.146 1.896,0.146 false 1.51,0.771 1.865,0.615 1.865,0.615 1.99,0.615 false 1.042,0.948 1.042,1.24 false 1.927,0.063 2.156,0.25 0.229,0.188 10 false *2 2.021,0.531 2.229,0.719 0.208,0.188 10 false *1 0.99,1.26 1.167,1.427 0.177,0.167 10 false *a

Install a new gasket and the air switching valve assembly with the 3 bolts.

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)

Text in Illustration
*1 Air Switching Valve Assembly
*2 No. 3 Air Tube
*a Claw

NOTICE:

Make sure the gasket's claws are not caught between the air switching valve assembly and No. 3 air tube.



b.
A307656

Install the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Attach the wire harness clamp to the air switching valve assembly and connect the air switching valve assembly connector.


Hide 17341F 2.CONNECT NO. 1 AIR HOSE

a.
A307659E03
0.917,1.417 1.146,1.792 1.146,1.792 1.573,1.792 true 0.635,1.219 0.813,0.292 0.813,0.292 0.927,0.292 true 1.594,1.698 1.823,1.875 0.229,0.177 10 true *a 0.948,0.208 1.156,0.406 0.208,0.198 10 true *b

Align the paint mark with the projection and connect the No. 1 air hose, and slide the clamp to secure the hose.

Text in Illustration
*a Paint Mark
*b Projection

HINT:

Make sure the direction of the hose clamp is as shown in the illustration.



Hide 12263 3.CONNECT NO. 3 VENTILATION HOSE

a.
A214824E04
0.688,1.313 0.927,0.99 0.927,0.99 1.073,0.99 false 0.594,0.875 0.771,1.052 0.177,0.177 10 false *a 0.594,1.969 0.781,2.146 0.188,0.177 10 false *b 1.104,0.906 1.313,1.125 0.208,0.219 10 false *c

Connect the No. 3 ventilation hose, and slide the clamp to secure the hose.

Text in Illustration
*a Front
*b Rear
*c Paint Mark

HINT:

The direction of the hose clamp is indicated in the illustration.