Home › Engine / Hybrid System › 3UR-FE ENGINE MECHANICAL › CYLINDER HEAD GASKET(for Bank 1)
RM27M0U _51 Engine / Hybrid System _049106 3UR-FE ENGINE MECHANICAL _0234021 CYLINDER HEAD GASKET(for Bank 1) A

3UR-FE ENGINE MECHANICAL  CYLINDER HEAD GASKET(for Bank 1)  REMOVAL  


PROCEDURE

Hide 17105 1.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH

a.

Remove the exhaust manifold LH (see page Engine / Hybrid System>3UR-FE EXHAUST>EXHAUST MANIFOLD>REMOVAL).


Hide 2.REMOVE CAMSHAFTS (for Bank 1)

Hide 13801 3.REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY

a.

Remove the 16 valve rocker arms from the cylinder head.

HINT:

Arrange the removed parts in the correct order.



Hide 13750 4.REMOVE VALVE LASH ADJUSTER ASSEMBLY

a.

Remove the 16 valve lash adjusters from the cylinder head.

HINT:

Arrange the removed parts in the correct order.



Hide 13716 5.REMOVE VALVE STEM CAP

a.

Remove the 16 valve stem caps from the cylinder head.

HINT:

Arrange the removed parts in the correct order.



Hide 11101 6.REMOVE CYLINDER HEAD SUB-ASSEMBLY LH

a.
A160736E11
2.948,0.01 3.063,0.167 0.115,0.156 10 true 1 3.24,0.646 3.354,0.802 0.115,0.156 10 true 2

Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.


b.
A160737E12
2.76,1.813 2.865,1.99 0.104,0.177 10 true 1 0.521,0.26 0.625,0.438 0.104,0.177 10 true 2 2.729,0.24 2.833,0.417 0.104,0.177 10 false 3 0.51,1.813 0.615,1.99 0.104,0.177 10 false 4 2.188,0.26 2.292,0.438 0.104,0.177 10 true 5 1.063,1.813 1.167,1.99 0.104,0.177 10 true 6 2.198,1.813 2.302,1.99 0.104,0.177 10 true 7 1.083,0.271 1.188,0.448 0.104,0.177 10 true 8 1.625,1.813 1.729,1.99 0.104,0.177 10 true 9 1.583,0.281 1.771,0.458 0.188,0.177 10 true 10

Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head bolts in the sequence shown in the illustration. Remove the 10 cylinder head bolts and plate washers.

HINT:

Be sure to arrange the removed parts for each installation position separately.


NOTICE:
·

Be careful not to drop washers into the cylinder head.

·

Head warpage or cracking could result from removing bolts in an incorrect order.




Hide 11116 7.REMOVE CYLINDER HEAD GASKET LH