Home › Engine / Hybrid System › 3UR-FBE LUBRICATION › OIL PRESSURE SWITCH
RM27M0U _51 Engine / Hybrid System _049116 3UR-FBE LUBRICATION _0234079 OIL PRESSURE SWITCH A

3UR-FBE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83520 1.INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY

a.
A186675E01
1.976,1.537 2.585,1.705 0.610,0.168 10 Adhesive 1.816,1.171 2.296,1.422 false 2.296,1.422 2.296,1.515 false

Apply adhesive to 2 or 3 threads of the oil pressure sender gauge.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



b.
A162467

Install the oil pressure sender gauge.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine within 1 hour after installation.



c.
A163657

Connect the sender gauge connector.