Home › Drivetrain › WF1AM TRANSFER › TOUCH SELECT 2-4 AND HIGH-LOW SYSTEM
RM27M0U _52 Drivetrain _049122 WF1AM TRANSFER _0234104 TOUCH SELECT 2-4 AND HIGH-LOW SYSTEM U

WF1AM TRANSFER  TOUCH SELECT 2-4 AND HIGH-LOW SYSTEM  TERMINALS OF ECU  


CHECK 4 WHEEL DRIVE CONTROL ECU


U152610E02
2.948,0.885 3.26,1.073 0.313,0.188 10 false A25 3.865,0.865 4.177,1.052 0.313,0.188 10 false A26 0.438,0.385 0.667,0.563 0.229,0.177 10 false *a

Text in Illustration
*a Component with harness connected
(4 Wheel Drive Control ECU)
- -

a.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A25-1 (DM1) - A25-5 (GND) W - W-B A. D. D. shift motor output Ignition switch ON
Transfer position switch 4H → 2WD
(during A.D.D. actuator Lock to Free operation)
10 to 14 V
A25-2 (DM2) - A25-5 (GND) Y - W-B A. D. D. shift motor output Ignition switch ON
Transfer position switch 2WD → 4H
(during A.D.D. actuator Free to Lock operation)
10 to 14 V
A25-5 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
A25-6 (B) - A25-5 (GND) G - W-B ECU power supply Always 11 to 14 V
A25-7 (DL1) - A25-5 (GND) LG - W-B A.D.D. actuator limit switch input Ignition switch ON
Transfer position 2WD (A.D.D. actuator Free)
10.5 to 14 V
Ignition switch ON
Transfer position 4WD (A.D.D. actuator Lock)
Below 1.5 V
A25-11 (LO) - A25-5 (GND) P - W-B Transfer position switch input Ignition switch ON
Transfer position switch 2WD
10.5 to 14 V
Ignition switch ON
Transfer position switch 4H
Below 1.5 V
Ignition switch ON
Transfer position switch 4L
Below 1 V
A25-12 (2-4) - A25-5 (GND) B - W-B Transfer position switch input Ignition switch ON
Transfer position switch 2WD
Below 1 V
Ignition switch ON
Transfer position switch 4H
Below 1.5 V
Ignition switch ON
Transfer position switch 4L
10.5 to 14 V
A25-16 (IG) - A25-5 (GND) V - W-B IG power Ignition switch ON 11 to 14 V
A25-18 (ADD) - A25-5 (GND) GR - W-B A.D.D. detection switch input Ignition switch ON
Transfer position 2WD
10 to 14 V
Ignition switch ON
Transfer position 4WD
Below 1.5 V
A25-20 (DL2) - A25-5 (GND) R - W-B A.D.D. actuator limit switch input Ignition switch ON
Transfer position 2WD (A.D.D. actuator Free)
Below 1.5 V
Ignition switch ON
Transfer position 4WD (A.D.D. actuator Lock)
10.5 to 14 V
A25-23 (CANH) - A25-22 (CANL) BE - W CAN communication line Ignition switch off 54 to 69 Ω
A26-1 (TM1) - A25-5 (GND) R - W-B Transfer shift motor output Ignition switch ON
Shift lever in N
Transfer position switch turned from 2WD to 4H (switching from 2WD to 4H)
Transfer position switch turned from 4H to 4L (switching from 4H to 4L)
10 to 14 V
A26-2 (TM2) - A25-5 (GND) W - W-B Transfer shift motor output Ignition switch ON
Shift lever in N
Transfer position switch turned from 4L to 4H (switching from 4L to 4H)
Transfer position switch turned from 4H to 2WD (switching from 4H to 2WD)
10 to 14 V
A26-6 (SCC) - A25-5 (GND) L - W-B Solenoid coil output Ignition switch ON
Transfer position switch turned from 2WD to 4H (switching from 2WD to 4H))
10 to 14 V
A26-12 (H4) - A25-5 (GND) BE - W-B Transfer indicator switch input Ignition switch ON
Transfer position not in 4L
4 to 6 V
Ignition switch ON
Transfer position 4L
Below 1.5 V
A26-13 (L4) - A25-5 (GND) B - W-B Transfer indicator switch input Ignition switch ON
Transfer position not in 4L
11 to 14 V
Ignition switch ON
Transfer position 4L
Below 1.5 V
A26-18 (TL1) - A25-5 (GND) V - W-B Transfer shift actuator limit switch input Ignition switch ON
Not switching driving mode
4 to 6 V
Ignition switch ON
Switching driving mode
4 to 6 V ←→ Below 1.5 V
A26-20 (TL2) - A25-5 (GND) BR - W-B Transfer shift actuator limit switch input Ignition switch ON
Not switching driving mode
4 to 6 V
Ignition switch ON
Switching driving mode
4 to 6 V ←→ Below 1.5 V
A26-22 (GTL) - A25-5 (GND) P - W-B Transfer shift actuator limit switch GND input Ignition switch ON
Not switching driving mode
4 to 6 V
Ignition switch ON
Switching driving mode
Below 1.5 V
A26-24 (TL4) - A25-5 (GND) SB - W-B Transfer shift actuator limit switch input Ignition switch ON
Not switching driving mode
4 to 6 V
Ignition switch ON
Switching driving mode
4 to 6 V ←→ Below 1.5 V
A26-26 (TL3) - A25-5 (GND) W - W-B Transfer shift actuator limit switch input Ignition switch ON
Not switching driving mode
4 to 6 V
Ignition switch ON
Switching driving mode
4 to 6 V ←→ Below 1.5 V