Home › Drivetrain › WF1AM TRANSFER › TRANSFER SHIFT ACTUATOR ASSEMBLY
RM27M0U _52 Drivetrain _049122 WF1AM TRANSFER _0234111 TRANSFER SHIFT ACTUATOR ASSEMBLY A

WF1AM TRANSFER  TRANSFER SHIFT ACTUATOR ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Change the vehicle to 2WD mode before removing the transfer shift actuator assembly.

If the vehicle cannot be changed to 2WD mode, since the new transfer shift actuator assembly is set in the 2WD position, connect all the connectors to the vehicle side wire harnesses to set the new transfer shift actuator assembly to the drive state of the vehicle before installing the new transfer shift actuator assembly.


PROCEDURE

Hide 36410J 1.REMOVE TRANSFER SHIFT ACTUATOR ASSEMBLY

a.
C291190

Disconnect the 3 connectors and detach the 2 clamps.


b.

Remove the 4 bolts and transfer shift actuator assembly.