Home › Drivetrain › AB60E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER ASSEMBLY(for Floor Shift Type)
RM27M0U _52 Drivetrain _049126 AB60E AUTOMATIC TRANSMISSION / TRANSAXLE _0234152 SHIFT LEVER ASSEMBLY(for Floor Shift Type) A

AB60E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY(for Floor Shift Type)  INSTALLATION  


PROCEDURE

Hide 33550 1.INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

a.
U152620E01
2.043,2.627 2.175,2.783 0.131,0.156 10 1 0.774,0.141 0.905,0.297 0.131,0.156 10 2 2.899,1.317 3.031,1.472 0.131,0.156 10 3 1.361,2.65 1.493,2.806 0.131,0.156 10 4

Temporarily install the transmission floor shift assembly to the body with the 4 bolts.


b.

Fully tighten the 4 bolts in the order shown in the illustration.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


c.

Connect the clamp and 2 connectors.


d.
C179207

Install the cable outer of the transmission control cable assembly to the shift lever retainer, and then install a new clip.


e.
U152373E03
1.448,0.76 0.583,0.76 true 0.417,0.677 0.604,0.885 0.188,0.208 10 false *1

Connect the control cable end to the shift lever assembly.

Text in Illustration
*1 Ridged

NOTICE:

Make sure to install the cable end so that the inner cable is not twisted. Confirm that the cable ridged side of the cable end is facing upward.



Hide 58861C 2.INSTALL NO. 1 CONSOLE BOX DUCT (w/ Rear Air Duct)

a.

Install the No. 1 console box duct with the 2 clips.