Home › Drivetrain › A760F AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION WIRE
RM27M0U _52 Drivetrain _049127 A760F AUTOMATIC TRANSMISSION / TRANSAXLE _0234162 TRANSMISSION WIRE A

A760F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION WIRE  INSTALLATION  


PROCEDURE

Hide 82125J 1.INSTALL TRANSMISSION WIRE

a.

Coat a new O-ring with ATF, and install it to the transmission wire connector.


b.
C125286

Install the transmission wire with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


c.
C155913

Connect the transmission wire connector.

HINT:

Push up the lever until the claw of the transmission wire connector makes a connection sound.



Hide 82125J 2.CONNECT TRANSMISSION WIRE

C351958E01
0.635,0.823 1.01,1.021 true 0.656,1.448 0.99,1.448 true 0.125,0.74 0.625,1.031 0.5,0.292 10 true Orange 0.313,1.375 0.656,1.667 0.344,0.292 10 true Blue

a.

Connect the 9 solenoid valve connectors.


b.

Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.

Torque:
for bolt A : 10 N*m (102 kgf*cm, 7 ft.*lbf)
for bolt B : 11 N*m (112 kgf*cm, 8 ft.*lbf)

HINT:

Each bolt length is indicated below.

12 mm (0.472 in.) for bolt A


36 mm (1.41 in.) for bolt B


c.

Attach the wire harness to the 2 clamps.


Hide 35330 3.INSTALL VALVE BODY OIL STRAINER ASSEMBLY

C209698

a.

Coat a new O-ring with ATF, and install it to the oil strainer.


b.

Install the oil strainer with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 35106 4.INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

C209348

NOTICE:

Be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.


a.

Install a new gasket and the oil pan with the 20 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


Hide 5.ADD AUTOMATIC TRANSMISSION FLUID