Home › Drivetrain › A760F AUTOMATIC TRANSMISSION / TRANSAXLE › OIL PUMP
RM27M0U _52 Drivetrain _049127 A760F AUTOMATIC TRANSMISSION / TRANSAXLE _0234173 OIL PUMP A

A760F AUTOMATIC TRANSMISSION / TRANSAXLE  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 35301A 1.INSTALL FRONT OIL PUMP OIL SEAL

D027961E09
1.823,1.24 2.313,1.24 true 2.354,1.167 2.698,1.365 0.344,0.198 10 false SST

a.

Using SST and a hammer, tap in a new oil seal.

SST
09350-30020  (09351-32140)

HINT:

The oil seal end should be flush with the outer edge of the pump body.



b.

Coat the lip of the oil seal with MP grease.


Hide 35301 2.FIX FRONT OIL PUMP BODY SUB-ASSEMBLY

a.

Place the oil pump body on the torque converter clutch.


Hide 35322 3.INSTALL FRONT OIL PUMP DRIVEN GEAR

D027959

a.

Coat the driven gear with ATF.


b.

Install the driven gear to the oil pump body.


Hide 35321 4.INSTALL FRONT OIL PUMP DRIVE GEAR

D027958

a.

Coat the drive gear with ATF.


b.

Install the drive gear to the oil pump body.


Hide 35301B 5.INSTALL FRONT OIL PUMP BODY O-RING

D027963E06
1.885,0.365 1.438,0.167 false 0.625,0.063 1.427,0.292 0.802,0.229 10 false New O-Ring

a.

Coat a new O-ring with ATF and install it to the oil pump body.


Hide 35370 6.INSTALL STATOR SHAFT ASSEMBLY

D027953

a.

Alight the bolt holes of the stator shaft with the bolt holes of the oil pump body and install the stator shaft to the oil pump body.


b.

Install the 14 bolts.

Torque:
11 N*m (110 kgf*cm, 8 ft.*lbf)


Hide 35617 7.INSTALL CLUTCH DRUM OIL SEAL RING

D027952E15
1.417,0.438 0.885,0.698 false 2.083,0.188 2.385,0.385 0.302,0.198 10 false x 3 0.052,0.74 1.229,1.115 1.177,0.375 10 true New Oil Seal Ring

a.

Coat 3 new oil seal rings with ATF.


b.

Squeeze the ends of the 3 oil seal rings together with the overlap distance 8 mm (0.314 in.) or less, and then install them to the starter shaft groove.

NOTICE:

Do not excessively widen the rings.


HINT:

After installing the oil seal rings, check that they rotate smoothly.