Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM27M0U _56 Audio / Visual / Telematics _049135 AUDIO / VIDEO _0234292 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  Voice is not Recognized  


PROCEDURE

1.CHECK CONDITION
a.

Check if the system voice recognition level is low when recognizing a particular voice.

Result
Result Proceed to
System voice recognition level is low with any voice A
System voice recognition level is low only for a particular voice B

HINT:

System voice recognition level varies depending on voice and pronunciation. This is not a malfunction.




A

2.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)

B

END (RECOGNITION BY PARTICULAR VOICE)

2.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)
a.
E268457

Enter the "Microphone Check" screen. [Refer to Check Mic&Voice Recognition in Operation Check (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>OPERATION CHECK)]


b.

When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.


c.

Push the recording switch and perform voice recording.

·

Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.

·

Voice can be recorded for up to 5 seconds.



d.

Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

OK:

All check results are normal.


Result
Result Proceed to
OK (for Column Shift Type) A
OK (for Floor Shift Type) B
NG C



A

B

C

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE