Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM27M0U _56 Audio / Visual / Telematics _049135 AUDIO / VIDEO _0234292 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  Disc cannot be Inserted or is Ejected Right After Insertion  


PROCEDURE

1.CHECK IF A PROPER DISC IS INSERTED
a.

Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

OK:

Disc is normal.


HINT:
·

Translucent or uniquely-shaped CDs cannot be played.

·

CDs and DVDs with adhesive paper labels should not be played.

·

Commercial audio CDs and DVDs can be played.

·

CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

·

MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.

·

For details on playable CDs and DVDs, refer to Owner's Manual.





OK

2.CHECK THAT DISC IS INSERTED PROPERLY

NG

CHANGE DISC

2.CHECK THAT DISC IS INSERTED PROPERLY
a.

Check if the disc is inserted upside down.

OK:

The disc is properly inserted.




OK

3.CHECK DISC

NG

INSERT DISC PROPERLY

3.CHECK DISC
a.
I100151

Disc cleaning

i.

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.


NOTICE:

Do not use a conventional record cleaner or antistatic preservative.





OK

END (DISC IS DIRTY)

NG

4.REPLACE DISC WITH ANOTHER AND RECHECK
4.REPLACE DISC WITH ANOTHER AND RECHECK
a.

Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.


Result
Result Proceed to
OK A
NG (for Column Shift Type) B
NG (for Floor Shift Type) C



A

END (DISC IS DEFECTIVE)

B

C