These DTCs are stored when a malfunction occurs in the CAN communication circuit.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0073 | CAN bus connection error | CAN communication system |
| U0100 | CAN reception error | |
| U0129 | CAN reception error | |
| U0140 | CAN reception error | |
| U0155 | CAN reception error | |
| U0164 | CAN reception error |
Clear the DTCs (See page Power Source / Network>CAN COMMUNICATION>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
Check for DTCs (See page Power Source / Network>CAN COMMUNICATION>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
No DTCs are output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG