Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat)
RM27M0U _58 Vehicle Interior _049136 SEAT _0234295 FRONT SEAT ASSEMBLY(for Power Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY LH

a.

Place the front seat assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
U152060E02
1.625,1.208 1.802,1.625 false 2.063,1.219 2.26,1.458 false 2.448,0.958 2.802,1.24 false 1.802,1.635 1.979,1.792 0.177,0.156 10 false *2 2.271,1.5 2.448,1.656 0.177,0.156 10 false *1 2.844,1.198 3.021,1.354 0.177,0.156 10 false *3

Connect the connector of the front seat airbag assembly LH.


c.

Connect the connector of the front seat wire LH.


d.

Connect the connector of the front seat inner belt assembly LH and attach the wire harness clamp under the seat.

Text in Illustration
*1 Front Seat Inner Belt Assembly LH
*2 Front Seat Wire LH
*3 Front Seat Airbag Assembly LH


e.

Align the pin of the front seat with the hole in the vehicle.


f.

Temporarily install the front seat assembly LH with the 4 bolts.


g.

Connect the cable to the negative (-) battery terminal.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).



h.

w/ Leg Support Adjustment Switch:

Operate the seat variable cushion switch to move the seat to the rearmost position.


i.

w/ Vertical Adjuster:

Operate the front power seat switch LH (vertical switch) to move the seat to the lowermost position.


j.

Operate the front power seat switch LH (slide switch) to move the seat to the rearmost position.


k.
B354883

Tighten the 2 bolts.

Torque:
37 N*m (375 kgf*cm, 27 ft.*lbf)


l.

Operate the front power seat switch LH (slide switch) to move the seat to the foremost position.


m.
B354882

Tighten the 2 bolts.

Torque:
37 N*m (375 kgf*cm, 27 ft.*lbf)


n.

During the sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the seat mounting bolts to adjust the adjuster position.


Hide 72158C 2.INSTALL INNER SEAT TRACK BRACKET COVER LH

a.

Attach the clip to install the inner seat track bracket cover LH.


Hide 72138H 3.INSTALL OUTER SEAT TRACK BRACKET COVER LH

a.

Attach the clip to install the outer seat track bracket cover LH.


Hide 71910A 4.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Install the front seat headrest assembly.


Hide 6.INSPECT POWER SEAT CONTROL SYSTEM

Hide 7.INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

Hide 8.INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)