Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.
87510K
1.INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY RH
Set the front seat cushion heater assembly LH on the separate type front seat cushion cover.
Using a tacker, install the front seat cushion heater assembly LH to the separate type front seat cushion cover with 10 new tack pins as shown in the illustration.
Do not substitute other metal parts for tack pins.
71071S
2.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
Set the separate type front seat cushion cover in place.
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 10 new hog rings as shown in the illustration.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Install the hog rings at the cutouts if they are there.
Attach the 2 fasteners.
| *1 | Fastener |
| *2 | Hog Ring Pliers |
| *a | Cutout |
3.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Attach the 12 hooks to install the separate type front seat cushion cover with pad.
4.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
71867A
5.INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD RH
71811D
6.INSTALL FRONT SEAT CUSHION SHIELD RH
72525A
7.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH
8.INSTALL FRONT SEAT ASSEMBLY RH
Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>INSTALLATION).