Home › Engine / Hybrid System › 1UR-FE STARTING › STARTER(for 2.0 kW Type)
RM27M0U _51 Engine / Hybrid System _049144 1UR-FE STARTING _0234363 STARTER(for 2.0 kW Type) A

1UR-FE STARTING  STARTER(for 2.0 kW Type)  INSTALLATION  


PROCEDURE

Hide 28100 1.INSTALL STARTER ASSEMBLY

a.

Install the flywheel housing side cover.


b.

Install the starter with the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


c.

Connect the starter wire with the nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


d.

Connect the starter connector.


e.

Attach the 2 wire harness clamps.


Hide 28192 2.INSTALL STARTER COVER

a.

Install the starter cover with the 3 bolts.

Torque:
12 N*m (117 kgf*cm, 8 ft.*lbf)


Hide 17104 3.INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL