28100
1.INSTALL STARTER ASSEMBLY
Install the flywheel housing side cover.
Install the starter with the 2 bolts.
Connect the starter wire with the nut.
Connect the starter connector.
Connect the 2 wire harness clamps.
28192
2.INSTALL STARTER COVER
Install the starter cover with the 3 bolts.
17104
3.INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH
Install the exhaust manifold RH (See page Engine / Hybrid System>1UR-FE EXHAUST>EXHAUST MANIFOLD>INSTALLATION).
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL