Home › Suspension › SUSPENSION › FRONT STABILIZER BAR
RM27M0U _53 Suspension _049152 SUSPENSION _0234398 FRONT STABILIZER BAR A

SUSPENSION  FRONT STABILIZER BAR  INSTALLATION  


PROCEDURE

Hide 48815 1.INSTALL FRONT NO. 1 STABILIZER BAR BUSH

C155987E01
2.057,1.784 2.735,1.928 0.678,0.143 10 Front Side 2.379,0.854 3.068,1.001 0.689,0.147 10 Outer Side 1.119,1.68 1.525,1.855 0.406,0.174 10 Bump

a.

Install the 2 bushes to the outer side of the bush stoppers on the front stabilizer bar as shown in the illustration.

NOTICE:

Be sure to install the front No. 1 stabilizer bar bushes so that the cut and bump of each bush faces the front of the vehicle.



Hide 48811 2.TEMPORARILY INSTALL FRONT STABILIZER BAR

a.

Temporarily install the front stabilizer bar with the 4 bolts and the stabilizer bracket LH and RH.


Hide 48824 3.TIGHTEN FRONT STABILIZER BRACKET

C155988

a.

Tighten the 4 bolts.

Torque:
69 N*m (704 kgf*cm, 51 ft.*lbf)


Hide 48810 4.TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY LH

C155989E02
1.042,0.792 1.313,0.958 0.271,0.167 10 true Nut

a.

Temporarily install the stabilizer link with the nut and bolt.


b.

Tighten the nut.

Torque:
150 N*m (1530 kgf*cm, 111 ft.*lbf)


Hide 48820B 5.TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Use the same procedures described for the LH side.


Hide 48810 7.TIGHTEN FRONT STABILIZER LINK ASSEMBLY LH

C162429E02
1.177,1.5 1.469,1.729 0.292,0.229 10 true Bolt

a.

Tighten the bolt.

Torque:
120 N*m (1224 kgf*cm, 89 ft.*lbf)


Hide 48820B 8.TIGHTEN FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Use the same procedures described for the LH side.


Hide 9.INSTALL FRONT WHEEL

Torque:
for Aluminum Wheel : 131 N*m (1336 kgf*cm, 97 ft.*lbf)
for Steel Wheel : 209 N*m (2131 kgf*cm, 154 ft.*lbf)