This DTC is stored when items controlled by the main body ECU (driver side junction block assembly) cannot be customized via the navigation system vehicle customization screen.
Power door lock control system
Wireless door lock control system
Lighting system
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15F6 | Main body ECU (driver side junction block assembly) vehicle setting processing error. | ·
CAN communication system ·
Power door lock control system ·
Wireless door lock control system ·
Lighting system ·
Main body ECU (driver side junction block assembly) ·
Navigation receiver assembly |
Use the Techstream to check if the CAN communication system is functioning normally (See page Power Source / Network>CAN COMMUNICATION>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
CAN communication DTCs are not output.
OK
NG
Check if the power door lock control system is malfunctioning (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the power door lock control system.
No malfunctions are present in the power door lock control system.
OK
NG
(See pageVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)
Check if the wireless door lock control system is malfunctioning (See page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the wireless door lock control system.
No malfunctions are present in the wireless door lock control system.
OK
NG
(See pageVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)
Check if the lighting system is malfunctioning (See page Vehicle Interior>LIGHTING>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the lighting system.
No malfunctions are present in the lighting system.
OK
NG
Display the "Vehicle Customization" screen.
Make a note of the customizable items for each main body ECU (driver side junction block assembly) related system.
These items shown as customizable via the navigation receiver assembly vehicle customization screen can also be changed using the Techstream. In a following step, the Techstream will be used.
To match-up the items in the navigation receiver assembly with the items on the Techstream, check the customize parameters list for the power door lock control system related items that can be customized via the navigation receiver assembly screen (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS).
To match-up the items in the navigation receiver assembly with the items on the Techstream, check the customize parameters list for the wireless door lock control system related items that can be customized via the navigation receiver assembly screen (See page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
To match-up the items in the navigation receiver assembly with the items on the Techstream, check the customize parameters list for the lighting system related items that can be customized via the navigation receiver assembly screen (See page Vehicle Interior>LIGHTING>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
Using the Techstream, confirm that it is possible to change the settings of the customize parameters that are available for customization via the navigation receiver assembly screen.
The items available for customization via the navigation receiver assembly screen can be customized successfully using the Techstream.
| Result | Proceed to |
|---|---|
| OK (for Column Shift Type) | A |
| OK (for Floor Shift Type) | B |
| NG | C |
A
B
C