Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM(for Radio and Display Type)
RM27M0U _56 Audio / Visual / Telematics _049159 PARK ASSIST / MONITORING _0234452 REAR VIEW MONITOR SYSTEM(for Radio and Display Type) U

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM(for Radio and Display Type)  TERMINALS OF ECU  


CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY


U152624E02
4.115,0.698 4.438,0.917 0.323,0.219 10 false J139 1.063,1.688 1.406,1.875 0.344,0.188 10 false J137 2.01,1.688 2.333,1.875 0.323,0.188 10 false J138 1.948,0.708 2.271,0.885 0.323,0.177 10 false J140

a.

Disconnect the J137 and J139 radio and display receiver assembly connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specification
J137-3 (ACC1) - J137-7 (GND1) GR - W-B Power source (ACC) Ignition switch off Below 1 V
Ignition switch ACC 11 to 14 V
J137-4 (+B1) - J137-7 (GND1) V - W-B Power source (+B) Always 11 to 14 V
J137-7 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
J139-1 (IG) - J137-7 (GND1) P - W-B Power source (IG) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V


c.

Reconnect the J137 and J139 radio and display receiver assembly connectors.


d.

Measure the voltage and waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specification
J139-2 (REV) - J137-7 (GND1) Y - W-B Reverse signal Ignition switch ON, shift lever in R 7.5 to 14 V
Ignition switch ON, shift lever not in R Below 1 V
J140-11 (CA+) - J140-23 (CGND) B - Shielded Power source Ignition switch ACC 5.5 to 7.05 V
J140-12 (V+) - J140-24 (V-) R - W Display signal Ignition switch ON Pulse generation (See waveform 1)
Ignition switch ON, screen blacked out by covering camera lens Pulse generation (See waveform 2)
J140-23 (CGND) - Body ground Shielded - Body ground Shielded ground Always Below 1 V


e.

Using an oscilloscope, check the waveform.

E333898E02
1.469,1.698 1.615,2.281 1.615,2.281 1.75,2.281 false 1.365,1.813 1.208,2.292 1.208,2.292 1.094,2.292 false 4.667,1.656 4.51,2.302 4.51,2.302 4.406,2.302 false 4.781,1.594 4.927,2.292 4.927,2.292 5.063,2.292 false 0.365,0.26 0.677,0.458 0.313,0.198 10 false *a 3.677,0.292 3.99,0.49 0.313,0.198 10 false *b 0.896,2.198 1.208,2.396 0.313,0.198 10 false *c 4.198,2.219 4.51,2.417 0.313,0.198 10 false *c 1.833,2.208 2.146,2.406 0.313,0.198 10 false *d 5.135,2.219 5.448,2.417 0.313,0.198 10 false *d 0.573,1.26 1.031,1.458 0.458,0.198 10 false GND 3.854,1.26 4.313,1.458 0.458,0.198 10 false GND

i.

Waveform 1

Measurement Condition
Item Content
Terminal No. (Symbol) J140-12 (V+) - J140-24 (V-)
Tool Setting 0.2 V/DIV., 50 μs/DIV.
Condition Ignition switch ON

HINT:

The video waveform changes according to the image sent by the television camera assembly.



ii.

Waveform 2

Measurement Condition
Item Content
Terminal No. (Symbol) J140-12 (V+) - J140-24 (V-)
Tool Setting 0.2 V/DIV., 50 μs/DIV.
Condition Ignition switch ON, screen blacked out by covering camera lens

HINT:

The video waveform changes according to the image sent by the television camera assembly.


Text in Illustration
*a Waveform 1
*b Waveform 2
*c Synchronized Signal
*d Video Waveform