52164A
1.REMOVE REAR BUMPER PLATE LH
Detach the 3 claws and clip and remove the rear bumper plate LH.
52163A
2.REMOVE REAR BUMPER PLATE RH
Use the same procedure described for the LH side.
52057
3.REMOVE REAR BUMPER PAD SUB-ASSEMBLY LH
Remove the 3 clips.
Detach the 12 claws and 2 guides and remove the rear bumper pad sub-assembly LH as shown in the illustration.
81690A
4.REMOVE LICENSE PLATE LIGHT ASSEMBLY LH
81270D
5.REMOVE LICENSE PLATE LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.
52179A
6.REMOVE REAR BUMPER BAR CORNER REINFORCEMENT LH
Remove the 5 bolts and rear bumper bar corner reinforcement LH.
52178A
7.REMOVE REAR BUMPER BAR CORNER REINFORCEMENT RH
Use the same procedure described for the LH side.
89341B
8.REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
89348A
9.REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
89341C
10.REMOVE NO. 3 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
82165
11.REMOVE NO. 2 FRAME WIRE
w/ Towing Package:
Detach all the clamps and remove the No. 2 frame wire from the receiver hitch bracket sub-assembly.
| *A | w/ Intuitive Parking Assist System | *B | w/o Intuitive Parking Assist System |
w/o Towing Package:
Detach all the clamps and remove the No. 2 frame wire from the rear bumper reinforcement sub-assembly.
| *A | w/ Intuitive Parking Assist System | *B | w/o Intuitive Parking Assist System |
52159B
12.REMOVE REAR BUMPER PLATE
Remove the 2 bolts and rear bumper plate.
| *A | w/ Towing Package |
| *B | w/o Towing Package |
52153
13.REMOVE REAR BUMPER BAR LH
Remove the 5 bolts and rear bumper bar LH.
52152
14.REMOVE REAR BUMPER BAR RH
Use the same procedure described for the LH side.
52166A
15.REMOVE REAR BUMPER UPPER COVER LH
Remove the 2 nuts and rear bumper upper cover LH.
52165A
16.REMOVE REAR BUMPER UPPER COVER RH
Use the same procedure described for the LH side.