Home › Vehicle Interior › EXTERIOR › REAR BUMPER(for Steel Type Bumper)
RM27M0U _58 Vehicle Interior _049164 EXTERIOR _0234482 REAR BUMPER(for Steel Type Bumper) A

EXTERIOR  REAR BUMPER(for Steel Type Bumper)  REASSEMBLY  


PROCEDURE

Hide 52166A 1.INSTALL REAR BUMPER UPPER COVER LH

a.

Install the rear bumper upper cover LH with the 2 nuts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 52165A 2.INSTALL REAR BUMPER UPPER COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 52153 3.INSTALL REAR BUMPER BAR LH

a.

Install the rear bumper bar LH with the 5 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 52152 4.INSTALL REAR BUMPER BAR RH

HINT:

Use the same procedure described for the LH side.


Hide 52159B 5.INSTALL REAR BUMPER PLATE

a.

Install the rear bumper plate with the 2 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 82165 6.INSTALL NO. 2 FRAME WIRE

a.

w/ Towing Package:

i.

Attach all the clamps to install the No. 2 frame wire to the receiver hitch bracket sub-assembly.



b.

w/o Towing Package:

i.

Attach all the clamps to install the No. 2 frame wire to the rear bumper reinforcement sub-assembly.



Hide 89341C 7.INSTALL NO. 3 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Hide 89348A 8.INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

Hide 89341B 9.INSTALL NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Hide 52179A 10.INSTALL REAR BUMPER BAR CORNER REINFORCEMENT LH

a.

Install the rear bumper bar corner reinforcement LH with the 5 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 52178A 11.INSTALL REAR BUMPER BAR CORNER REINFORCEMENT RH

HINT:

Use the same procedure described for the LH side.


Hide 81690A 12.INSTALL LICENSE PLATE LIGHT ASSEMBLY LH

Hide 81270D 13.INSTALL LICENSE PLATE LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52057 14.INSTALL REAR BUMPER PAD SUB-ASSEMBLY LH

a.

Attach the 12 claws and 2 guides to install the rear bumper pad sub-assembly LH.


b.

Install the 3 clips.


Hide 52164A 15.INSTALL REAR BUMPER PLATE LH

a.

Attach the 3 claws and clip to install the rear bumper plate LH.


Hide 52163A 16.INSTALL REAR BUMPER PLATE RH

HINT:

Use the same procedure described for the LH side.