81220
1.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
81210A
2.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure described for the LH side.
89341A
3.REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
89348
4.REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
52114A
5.REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET
Remove the clip.
Remove the 10 bolts and front bumper extension mounting bracket.
52128B
6.REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)
Detach the 2 claws and remove the front bumper hole cover LH.
| *A | for Steel Type Bumper |
| *B | for Resin Type Bumper |
52127D
7.REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)
Use the same procedure described for the LH side.
52128B
8.REMOVE FRONT BUMPER HOLE COVER LH (w/ Fog Light)
for Steel Type Bumper:
Detach the 2 claws and remove the front bumper hole cover LH.
for Resin Type Bumper:
Remove the clip.
Detach the 2 claws and remove the front bumper hole cover LH.
52127D
9.REMOVE FRONT BUMPER HOLE COVER RH (w/ Fog Light)
Use the same procedure described for the LH side.
75101
10.REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY
Remove the 2 screws and front license plate bracket sub-assembly.
52113D
11.REMOVE FRONT BUMPER EXTENSION LH
Remove the 4 nuts and front bumper extension LH.
| *A | for Steel Type Bumper |
| *B | for Resin Type Bumper |
52112D
12.REMOVE FRONT BUMPER EXTENSION RH
Use the same procedure described for the LH side.
53112E
13.REMOVE LOWER NO. 1 RADIATOR GRILLE
Detach the 17 claws and remove the lower No. 1 radiator grille from the front valance panel.