Home › Vehicle Interior › EXTERIOR › FRONT BUMPER
RM27M0U _58 Vehicle Interior _049164 EXTERIOR _0234487 FRONT BUMPER A

EXTERIOR  FRONT BUMPER  REASSEMBLY  


PROCEDURE

Hide 53112E 1.INSTALL LOWER NO. 1 RADIATOR GRILLE

a.

Attach the 17 claws to install the lower No. 1 radiator grille to the front valance panel.


Hide 52113D 2.INSTALL FRONT BUMPER EXTENSION LH

a.

Install the front bumper extension LH with the 4 nuts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 52112D 3.INSTALL FRONT BUMPER EXTENSION RH

HINT:

Use the same procedure described for the LH side.


Hide 75101 4.INSTALL FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY

a.

Install the front license plate bracket sub-assembly with the 2 screws.


Hide 52128B 5.INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)

a.

Attach the 2 claws to install the front bumper hole cover LH.


Hide 52127D 6.INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 52128B 7.INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light)

a.

for Steel Type Bumper:

i.

Attach the 2 claws to install the front bumper hole cover LH.



b.

for Resin Type Bumper:

i.

Attach the 2 claws to install the front bumper hole cover LH.


ii.

Install the clip.



Hide 52127D 8.INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 52114A 9.INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET

a.

Install the front bumper extension mounting bracket with the 10 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


b.

Install the clip.


Hide 89348 10.INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

Hide 89341A 11.INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Hide 81220 12.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

Hide 81210A 13.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedure described for the LH side.