Home › Vehicle Interior › EXTERIOR › REAR BUMPER(for Resin Type Bumper)
RM27M0U _58 Vehicle Interior _049164 EXTERIOR _0234500 REAR BUMPER(for Resin Type Bumper) A

EXTERIOR  REAR BUMPER(for Resin Type Bumper)  REASSEMBLY  


PROCEDURE

Hide 52166A 1.INSTALL REAR BUMPER UPPER COVER LH

a.

Install the rear bumper upper cover LH with the 2 nuts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 52165A 2.INSTALL REAR BUMPER UPPER COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 52159B 3.INSTALL REAR BUMPER PLATE

a.

Install the rear bumper plate with the 2 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 52154B 4.INSTALL REAR BUMPER SIDE STAY LH

a.

Install the rear bumper side stay LH with the 6 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 52153A 5.INSTALL REAR BUMPER SIDE STAY RH

HINT:

Use the same procedure described for the LH side.


Hide 82165 6.INSTALL NO. 2 FRAME WIRE

a.

w/ Towing Package:

i.

Attach all the clamps to install the No. 2 frame wire to the receiver hitch bracket sub-assembly.



b.

w/o Towing Package:

i.

Attach all the clamps to install the No. 2 frame wire to the rear bumper reinforcement sub-assembly.



Hide 89341C 7.INSTALL NO. 3 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Hide 89341B 8.INSTALL NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Hide 88172 9.INSTALL BLIND SPOT MONITOR SENSOR LH (w/ Blind Spot Monitor System)

Hide 88162 10.INSTALL BLIND SPOT MONITOR SENSOR RH (w/ Blind Spot Monitor System)

HINT:

Use the same procedure described for the LH side.


Hide 52156E 11.INSTALL REAR BUMPER EXTENSION INSERT LH

a.

Install the rear bumper extension insert LH with the 8 clips.


Hide 52155E 12.INSTALL REAR BUMPER EXTENSION INSERT RH

HINT:

Use the same procedure described for the LH side.


Hide 52057 13.INSTALL REAR BUMPER PAD SUB-ASSEMBLY LH

a.

Attach the clamp to the No. 2 frame wire.


b.

Attach the 12 claws and 2 guides to install the rear bumper pad sub-assembly LH.


c.

Install the 3 clips.


Hide 52164A 14.INSTALL REAR BUMPER PLATE LH

a.

Attach the 3 claws and clip to install the rear bumper plate LH.


Hide 52163A 15.INSTALL REAR BUMPER PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 81690A 16.INSTALL LICENSE PLATE LIGHT ASSEMBLY LH

Hide 81270D 17.INSTALL LICENSE PLATE LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.