Home › Power Source / Network › MULTIPLEX COMMUNICATION › LIN COMMUNICATION SYSTEM
RM27M0U _57 Power Source / Network _049167 MULTIPLEX COMMUNICATION _0234509 LIN COMMUNICATION SYSTEM D

MULTIPLEX COMMUNICATION  LIN COMMUNICATION SYSTEM  SYSTEM DESCRIPTION  


LIN COMMUNICATION SYSTEM DESCRIPTION


·

The LIN communication system is used for communication between the components below.

·

The LIN communication system has a component as a control master.


a.

Window and Sliding Roof Components that Use LIN Communication Bus (for CrewMax)

i.

Main Body ECU (Driver Side Junction Block)*1


ii.

Power Window Regulator Master Switch Assembly*2


iii.

Front Power Window Regulator Motor Assembly LH*2


iv.

Front Power Window Regulator Motor Assembly RH*2


v.

Sliding Roof Drive Gear Sub-assembly (Sliding Roof ECU)*3

HINT:
·

*1: Control master

·

*2: for Power Window Control System (w/ Jam Protection Function)

·

*3: w/ Sliding Roof System





b.

Heater Components that Use LIN Communication

i.

Air Conditioning Amplifier Assembly*

HINT:

*: Control master



ii.

Integration Air Conditioning Control Assembly




LIN COMMUNICATION SYSTEM DTCs


The control master component shown below outputs LIN communication system DTCs when there is a malfunction in the LIN communication. If a LIN communication stops, the control master of that part of the LIN communication system outputs DTCs.

a.

Main Body ECU (Driver Side Junction Block)