SYSTEM DIAGRAM
| No. | ECU/Sensor Name |
|---|---|
| 1 | ECM |
| 2 | Network gateway ECU*1 |
| 3 | Main body ECU (driver side junction block assembly) |
| 4 | Brake actuator assembly (skid control ECU) |
| 5 | Steering angle sensor |
| 6 | DLC3 |
| 7 | Center airbag sensor assembly |
| 8 | Bus buffer ECU*2 |
| 9 | 4WD control ECU*3 |
| 10 | Air conditioning amplifier assembly |
| 11 | ·
Radio and display receiver assembly*4 ·
Navigation receiver assembly*5 |
| 12 | Brake control with bracket relay*6 |
| 13 | Combination meter assembly |
| 14 | Front power seat control ECU and switch LH*7 |
| 15 | Outer mirror control ECU assembly*7 |
| 16 | Multiplex tilt and telescopic ECU*7 |
| 17 | Blind spot monitor sensor RH*1 |
| 18 | No. 5 junction connector*1 |
| 19 | Blind spot monitor sensor LH*1 |
*1: w/ Blind Spot Monitor System
*2: w/ Bus Buffer ECU
*3: for 4WD
*4: w/ Audio and Visual System
*5: w/ Navigation System
*6: w/ Trailer Brake Control System
*7: w/ Seat Memory
V BUS
V2 BUS (w/ Blind Spot Monitor System)
MS BUS (w/ Seat Memory)
SENSOR BUS (w/ Blind Spot Monitor System)